Sepax Monomix dT20 Affinity Resin is a narrowly dispersed polymethacrylate rigid base bead, functionalized with a polyhydroxylated surface coating layer that provides a bio-inert surface, which shows low non-specific binding. Oligo dT20-mer is then conjugated to the bead surface through a proprietary method.

Utilizing proprietary surface technologies, SRT-10 and SRT-10C SEC phases are made of uniform, hydrophilic, and neutral nanometer thick films chemically bonded on high purity and mechanically stabilized 10 µm silica.

TweenTrap columns are specially designed for trapping surfactants, such as Tweens, in aqueous samples.

Sepax Proteomix POR50-dT20 Affinity Resin is a monodispersed PS/DVB base bead that has a profuse porous structure with large through pores, good physical and chemical stability and good pressure resistance.

Utilizing proprietary surface technologies, SRT-10 and SRT-10C SEC phases are made of uniform, hydrophilic, and neutral nanometer thick films chemically bonded on high purity and mechanically stabilized 10 µm silica.

Wide range of pore sizes and high compatibility with 100% aqueous phases make Bio-C18 columns ideal for high resolution mapping of peptides and separation of natural and synthetic peptides and small proteins.

The Proteomix POR-SA Affinity HTP column is designed for high-throughput analysis of biotinylated biomolecules under high-pressure conditions.

Utilizing proprietary surface technologies and 3 µm particle size, BioMix-300 phase is made of uniform, hydrophilic, and neutral nanometer thick films chemically bonded on the high purity and enhanced mechanical stability silica.

Bio-C8 phase is made of monomeric and fully endcapped chemistry.

ProAqa Excel Protein A Affinity HPLC column is specifically designed for fast, accurate, and robust titer determination and quantification of monoclonal antibodies during cell line selection, upstream bioprocess optimization, and quality control.

Bio-C4

Adeno-associated viruses (AAV) are one of the most commonly used viral vectors for gene therapy to deliver therapeutic genes.

Proteomix® RP packings are porous polystyrene divinylbenzene (PS/DVB) polymer resins with narrow-dispersed particle size distribution.

Proteomix POR IEX

Utilizing proprietary surface technologies, Sepax SRT-LVL SEC phases are composed of uniform, hydrophilic, and neutral nanometer-thick films chemically bonded to high-purity, mechanically stable silica.

Proteomix® HIC-ADC DARx columns are engineered for high-resolution HIC separations and optimized for ADC analysis using hydrophilic coating technology.

Antibodix columns are specially designed for high resolution, high efficiency and high recovery separations of antibodies.

Proteomix® HIC columns are specially designed for high resolution and high efficiency separations of proteins, monoclonal antibodies (mAbs), antibody drug conjugates (ADCs), oligonucleotides and peptides via a hydrophobic interaction chromatography (HIC) mechanism.

Non-porous Proteomix Ion-exchange Phases - High Resolution and High Capacity

Monomix MC10 SEC columns are packed with highly crosslinked, rigid, spherical polymethacrylate-based particles engineered for high-performance size exclusion chromatography.

Flow Calibration Service

SDPROC Microprocessor Driven Command Module

Optical Sensor Switch for Rotameters (Single)

Optical Sensor Switch for Rotameters (Double)

TPU DP Dispensing Peristaltic Pump

TPU RP Adjustable RPM Pump

TPU AD Adjustable RPM Pump

TPU Peristaltic Pump Heads

TPU FX Fixed RPM Peristaltic Pumps

TPV DP Dispensing Peristaltic Pump

TPV RP Adjustable RPM Pump

TPV AD Adjustable RPM Pump

TPV Peristaltic Pump Heads

TPT Peristaltic Pumps

SMVI Intelligent Control Valve

SMV stepping motor valve

PSV-D proportional solenoid valve driver

PSV proportional solenoid valve

VT6 PTFE needle valve 6mm orifice

VT PTFE precision needle valves

VT PTFE needle valves

VB precision barstock valves

VB barstock valves

PWM paddle-wheel flow meter

PWE paddle-wheel flow meter

model L PTFE flow meters

model M industrial flow meters

model xV multi-gas mid-range meters

model G gas proportioner meters

model Tx multi flow tube PTFE meters

model Px multi flow tube meters

KIT flow meter kits

model F PTFE in-line flow meters

model V PTFE single flow tube rotameter for medium flow rate measurement

model V medium range flow meters

model S single tube flow meters

model T single flow tube PTFE meters

model P single flow tube meters

ZFM digital mass flow meter

XFM digital mass flow meter

DPM mass flow meter

GFM mass flow meter

TIO Flow Totalizer, I/O, Monitor & Control

AFC analog mass flow controller

DFC digital mass flow controller

DPC mass flow controller

Safety Waste Cap LISA, LC

Safety Waste Cap LISA, satellite, el

Safety Waste Cap LISA, satellite

HPLC supply set I, GL45, 1000 ml, brown

HPLC supply set I, GL45, 1000 ml

HPLC supply set I, GL45, 1 L, PFAS

Air valve, GreenLine, PU=100

Air valve, GreenLine, PU=50

Air valve, GreenLine, PU=8

Air valve, GreenLine, PU=10

Air valve, GreenLine, PU=1

Safety Cap VI, GreenLine: GL45, PEEK

Safety Cap IV, GreenLine: GL45, PEEK

Safety Cap III, GreenLine: GL45, PEEK

Safety Cap II, GreenLine: GL45, PEEK

Safety Cap I, GreenLine: GL45, PEEK

HPLC Starter Kit VI, GreenLine: PEEK

HPLC Starter Kit IV, GreenLine: PEEK

HPLC starter kit III, GreenLine: PEEK

HPLC starter kit II, GreenLine: PEEK

HPLC starter kit I, GreenLine: PEEK

HPLC Starter Kit I

GFC low cost aluminum or stainless steel thermal mass flow controllers

Zenix®-C SEC phase, developed based on innovative surface coating technology, comprises of uniform, hydrophilic, and neutral nanometer thick film chemically bonded to high purity and mechanically stabilized silica.

Made of 3 µm silica particles, Zenix SEC packing is a breakthrough technology for size exclusion chromatography

Offers ideal phase chemistry for hydrophobic samples like insulin, membrane protein monoclonal antibodies derivatized with polymer branches (polypeptide or PEG) separation.

This proprietary surface technology results in excellent column-to-column reproducibility.

Simultaneous CHNS-O analysis with advanced automation.

The office chair for the high-tech industry

Comfortable for harsh environments.

The best chair for sitting in production.

The chair for reliable discharge.

The LABSIT at the laboratory workstation

The Bimos CLEANROOM BASIC sets new standards in cleanrooms.