The DruvaTEC stainless steel corrugated flexible hose comes with a pre-assembled cylinder valve adaptor. Working pressure up to 300 bar. Robust design in compliance with ISO 10380.

The Gasarc Tech Master GPF430 high-pressure flexible tailpipe is designed for use with non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%). It is intended for use in conjunction with our gas manifolds.

The DruvaTEC Filter FZ11 is designed to handle flow rates of 800 Nm³/h at 40 bar pressure with ease.

The DruvaTEC F120A acetylene filter is designed to ensure a smooth gas flow by preventing mechanical particles from contaminating the system.

Ensure secure and efficient operation with DruvaTEC high-pressure isolating valves that are specifically engineered for various manifold systems and applications.

The Gasarc Tech Master brass pipeline pressure relief valve is compatible with non-corrosive and toxic, technical gases up to grade 4.5 purity (99.995%).

The Gasarc Tech Master GPF410 high-pressure flexible hose is designed for use with Acetylene up to grade 4.5 purity (99.995%). It is intended for use in conjunction with our gas manifolds.

The DruvaTEC mid-flow extension header kit is used to increase the number of high-pressure inlet ports for manifolds in industrial gas supply systems, handling industrial, inert, flammable, and oxidising gases, and gas mixtures. It is not suitable for corrosive and/or toxic gases.

The Gasarc Tech Master GPF400 high-pressure flexible hose is designed for use with non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%). It is intended for use in conjunction with our gas manifolds.

The Gasarc Tech Master GPF420 high-pressure hose is designed for use with Oxygen up to grade 4.5 purity (99.995%). It is intended for use in conjunction with our gas manifolds.

The DruvaTEC MANYFLOW high-pressure shut-off valve is a versatile, modular unit designed for reliable gas manifold systems, handling high-pressure applications with Acetylene and compressed gases up to 300 bar.

The Druva 20 m³ Range REED contact gauges offer potential-free pressure indication on upstream and downstream sides of line regulators, cylinder regulators, and gas manifolds.

The Gasarc Lab Master LGF540 high-pressure flexible hose is designed for use with non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%). They are intended for use in conjunction with our gas manifolds.

The Druva Gas Management Signal Boxes DGM-SK are fault-indicating units that can monitor up to ten electrical circuits and provide both acoustic and optical signals to alert users of deviations and malfunctions.

The Gasarc Spec Master HPF650 stainless steel spiral high-pressure flexible tailpipe is designed for use with non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%).

The Druva 20 m³ Range Cylinder Connections BS 341 offers a complete solution for FMD series 500 + 320, featuring an NPT 1/4"m outlet.

The Gasarc Lab Master LGF560 high-pressure convoluted flexible hose is designed for use with non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%). It is intended for use in conjunction with our gas manifolds.

The Druva 20 m³ Range Cylinder Connections CGA provides a complete solution for FMD series 500 + 320, featuring an NPT 1/4"m outlet.

The Druva Tube Fittings, Tube End 6mm, are the perfect choice for a wide range of settings. Available in both brass and stainless steel, these fittings offer superior durability and corrosion resistance to endure tough conditions. The brass version is perfect for handling technical gas, while the stainless steel fittings fit perfectly within high-purity applications.

The Gasarc Chem Master high-purity cylinder connectors are designed for use with our grade 6.0 purity (99.9999%) range of regulators.

The Gasarc Spec Master HPH6000 header rail assemblies are designed for use with non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%).

The Druva 20 m³ Range pressure transmitter provides excellent performance for gas systems handling inert, flammable, and oxidising noncorrosive gases and gas mixtures up to a purity of 6.0. It is not usable for Hydrogen and in areas with explosion hazards.

The Gasarc Spec Master pipeline pressure relief valve is compatible with non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%).

The Gasarc Lab Master high-purity nickel-plated brass pipeline pressure relief valve is compatible with non-corrosive and toxic gases up to grade 5.0 purity (99.999%).

The Druva 20 m³ Range high-purity corrugated hose is a high-pressure, stainless steel hose designed for flexible and reliable connections between pressurised gas cylinders and manifolds.

The Gasarc Tech Master GPH4000 header rail assemblies are designed for use with non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%).

The Gasarc Spec Master non-return valve is designed to prevent the backflow of high-pressure gases, specifically non-corrosive, toxic, and high-purity up to grade 6.0 (99.9999%).

The DruvaPUR 20 m³ Range 2-port and 3-port high-purity purge block is designed for use with gases up to purity level 6.0, excluding oxygen.

The Druva 20 m³ Range high-purity handwheel lock is a new accessory for our range of shut-off valves with a round handwheel design.

The DruvaPUR 20 m³ Range Coil-SS-178D high-purity stainless steel coil provides a reliable and flexible connection between gas cylinders and manifolds.

The Gasarc Chem Master SGF650 high-pressure spiral flexible tailpipe is designed for use with corrosive, toxic, and high-purity gases up to grade 6.0 purity (99.9999%).

The Druva 20 m³ Range check valves are designed to ensure unidirectional gas flow to protect system integrity and enhance operational safety.

The Druva adapters, available in brass and stainless steel, are ideal for technical industrial and high-purity gas control applications.

The Druva Straight Tube Fittings are essential components designed to connect and secure the tubing in gas control systems, available in a variety of sizes to fit your specific needs.

The Gasarc Lab Master LGF510 high-pressure flexible hose assemblies are designed for use with high-purity acetylene up to grade 5.0 purity (99.999%). They are intended for use in conjunction with our gas manifolds.

The Druva Solenoid Valve Control Box DGM MV-05 is designed to manage and monitor solenoid valves with five/ten output channels, featuring an emergency shutdown input and integration with higher-level signals like DDC or PLC.

The DruvaPUR LAB System wall adapter is suitable for gas supply systems in laboratories handling inert, flammable, oxidising, and corrosive gases up to purity grade 6.0.

The DruvaPUR 20 m³ Range high-purity extension header kits expand the number of high-pressure inlet ports for manifolds in gas supply systems handling pure, inert, flammable, and oxidising gases and gas mixtures up to gas purity 6.0.

The Gasarc Spec Master HPF660 high-pressure convoluted flexible hose is designed for use with non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%).

The Gasarc Chem Master high-purity pipeline pressure relief valve is compatible with corrosive, toxic, and high-purity gases up to grade 6.0 purity (99.9999%).

The Gasarc Chem Master SGH6000 header rail assemblies and tailpipes are designed for use with corrosive, toxic, and high-purity gases up to grade 6.0 purity (99.9999%).

The DruvaTEC CV300 BG Low- and Middle-Flow Series Non-Return Valve can be used in supply systems for inert, flammable, and oxidising gases up to a purity of 4.5. It is not suitable for corrosive gases or their mixtures.

The DruvaPUR 20 m³ Range Coils-SS-019D high-purity coil is designed to be used as a connecting pipe between the gas cylinder and manifold.

The Druva 20 m³ Range Cylinder Connections AFNOR provides complete solutions for FMD series 500 + 320 with an NPT 1/4"m outlet.

The Gasarc Chem Master SGF660 high-pressure convoluted flexible hose is designed for use with corrosive, toxic, and high-purity gases up to grade 6.0 purity (99.9999%).

The Gasarc Lab Master non-return valve is designed to prevent the backflow of high-pressure gases, specifically corrosive, toxic, and high-purity up to grade 5.0 (99.999%) gases.

The Druva LAB Range flowmeters provide precise flow measurement and control, complete with a metering valve, conversion table, and 1/4" NPT inlet/outlet for seamless integration.

The Gasarc visual and audible gas alarm panel is designed to alert remote users when a gas cylinder or bank of cylinders is being exhausted.

The Druva 20 m³ Range Cylinder Connections UNI offers a complete solution for FMD series 500 + 320, featuring an NPT 1/4"m outlet.

The Druva 20 m³ Range Cylinder Connections DIN 477 offers complete solutions for the FMD series 500 + 320 with an NPT 1/4"m outlet.

The Druva LAB Series safety gauges feature a G1/4" m connection and accuracy class 2.5 for precise pressure monitoring.

The Gasarc Spec Master high-purity cylinder connectors are designed for use with our grade 6.0 purity (99.9999%) range of regulators.

The Chem Master high-purity non-return valve is designed to prevent the backflow of high-pressure gases, specifically corrosive, toxic, high-purity gases up to grade 6.0 (99.9999%).

Druva 20 m³ Range Inductive Contact Gauges KI 50 is designed for inert, combustible, oxidising, and corrosive gases and gas mixtures up to a maximum nominal pressure of 300 bar.

The Gasarc Spec Master HPF620 high-purity high-pressure flexible hose is designed for handling oxygen up to grade 6.0 purity (99.9999%).

The Gasarc Lab Master LGF550 high-pressure spiral flexible tailpipe is designed for use with non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%). It is intended for use in conjunction with our gas manifolds.

The Gasarc Lab Master high-purity cylinder connectors in brass are designed to be used with our grade 5.0 purity (99.999%) range of regulators.

The Gasarc Lab Master LGH500 header rail assemblies are designed for use with non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%).

The Gasarc Lab Master LGF520 high-pressure flexible hose is designed for use with high-purity oxygen up to grade 5.0 purity (99.999%). It is intended for use in conjunction with our gas manifolds.

The DruvaPUR LAB System tube adapter is suitable for gas supply systems in laboratories handling inert, flammable, oxidising, and corrosive gases up to purity grade 6.0.

The Druva 20 m³ Range Cylinder Connections NEN 3268 offers a complete solution for FMD series 500 + 320, featuring an NPT 1/4"m outlet.

The DruvaTEC acetylene connection hoses are designed for cutting, welding, and other high-pressure industrial applications.

The Druva 20 m³ Range LAB Series flashback arrestors provide essential safety for cutting and welding applications. They are available in brass and stainless steel variants, are and suitable for gases like Acetylene, Hydrogen, Methane, Oxygen, and Propane.

The Druva 20 m³ Range relief valves are direct-acting, spring-loaded valves designed to safely release excess pressure in gas systems.

The Druva 20 m³ Range safety gauges RM 50 with NPT 1/4" connection and accuracy class 2.5 provide precise pressure monitoring with an inlet below for enhanced protection.

The Druva Tube Fittings - Elbow 90° provide reliable connections for your gas control systems, available in G1/4" male threads and sizes 6, 8, 10, or 12 mm, in both brass and stainless steel options.

The Gasarc Spec Master HPF640 high-purity high-pressure flexible hose is designed for use with non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%).

The Druva T-Shape Tube Fittings, available in multiple sizes and materials, provide secure connections for branching tubes in industrial and high-purity systems.

The DruvaPUR LAB Series high-purity 6mm hose nozzles are designed for secure and precise connections in gas control systems.

Second-stage pressure control for ultra-high-purity gas systems, with free-poppet regulation and multiple pressure configurations.

Second-stage pressure control for ultra-high-purity gas systems, with free-poppet regulation and optional purge connections.

The DruvaTEC primary mixed gas line regulator offers high-performance, single-stage gas regulation in brewery applications with a 230 bar working pressure and 50 LPM flow rate.

The DruvaTEC primary mixed gas line regulator with a wall bracket is a high-performance regulator designed for beverage applications, offering reliable gas control with a 230 bar working pressure and 50 LPM gas flow.

The DruvaTEC primary line regulator with a wall bracket is designed for efficient gas control of CO2 gas in soft drink systems.

The DruvaTEC mixed gas line regulator provides precise control and easy pressure monitoring in the beverage/brewery industry.

The DruvaTEC 20 m3 Series LTLF four-port single-stage line regulator is used in gas supply systems for industrial, inert, flammable, and oxidising gases and gas mixtures. Not usable for corrosive or toxic gases and gas mixtures.

The DruvaTEC 20 m3 Series LTLJ six-port single-stage line regulator is used in gas supply systems for industrial, inert, flammable, and oxidising gases and gas mixtures. It is not usable for corrosive or toxic gases and gas mixtures.

The DruvaTEC 250 m3 Series S151 single-stage line regulator offers a low-pressure, high-flow regulation for industrial applications like oxy-fuel cutting, laser processing, and arc welding shielding gas stabilization.

The DruvaTEC OMT is a second-stage low-pressure line regulator designed for burning gases such as LPG and natural gas, as well as other non-corrosive gases.

Experience precision gas control with the Gasarc Tech Master GPL420 single-stage line regulator, engineered for high-pressure industrial applications.

The DruvaTEC 100 m3 Series LTMHXSJ six-port single-stage line regulator can be used for the supply of industrial, inert, flammable, and oxidising gases and gas mixtures. It is suitable for corrosive or toxic gases and gas mixtures.

Designed for medium- and low-pressure applications, the DruvaTEC PROTÉE 431 line regulator with a balanced valve is suitable for the distribution of all non-corrosive compressed gases, except oxygen. For oxygen, please contact us.

The DruvaTEC CELTIC AML1 and RGCL Direct first-stage line regulators are designed to be used with all common non-corrosive industrial gases for precise and consistent gas regulation.

The DruvaTEC DE 232 is a pneumatic loaded high-flow, high-pressure line regulator that is engineered for inert gas applications to provide constant and stable flow.

The DruvaTEC 250 m3 Series D1G single-stage hybrid line regulator can be used in supply systems of inert, flammable, and oxidising gases with a purity of 4.5. It is not suitable for acetylene, corrosive, or toxic gases.

The DruvaTEC RD 05 Release Security System automatically shuts off gas flow if outlet pressure deviates beyond the preset safety range, ensuring reliable and safe operation when used with selected Druva regulators.

Designed for medium- and low-pressure applications, the DruvaTEC PROTÉE 432 line regulator with a balanced valve is suitable for the distribution of all non-corrosive gases, except oxygen.

The DruvaTEC CELTIC AML2 Direct second-stage line regulator is designed to be used with all common non-corrosive industrial gases for precise and consistent gas regulation.

The DruvaTEC 100 m3 Series LTMHXSF four-port single-stage line regulator can be used for the supply of industrial, inert, flammable, and oxidising gasses and gas mixtures. Not suitable for corrosive or toxic gases and gas mixtures.

The DruvaTEC 20 m3 Series S100 single-stage low-pressure line regulator is designed to provide stable and high-flow oxygen, inert, and fuel gas delivery for various industrial applications.

The DruvaTEC 20 m3 Series LTLM four-port single-stage line regulator is used in gas supply systems for industrial, inert, flammable, and oxidising gases and gas mixtures. Not usable for corrosive or toxic gases and gas mixtures.

The Gasarc Tech Master GPL400 single-stage diaphragm line regulator is designed for secondary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems.

The Gasarc Tech Master GPL410 single-stage diaphragm line regulator offers reliable secondary pressure control for acetylene gas up to 99.995% purity (grade 4.5) in gas distribution systems.

The DruvaTEC CELTIC JUNIOR 74 Direct first-stage line regulator is designed to be used with all common non-corrosive industrial gases for precise and consistent gas regulation.

The Gasarc Lab Master LGL500 single-stage diaphragm line regulator is designed for secondary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) in gas distribution systems.

The Gasarc Lab Master LGP510 single-stage diaphragm point-of-use regulator is designed for secondary pressure gas control of high-purity acetylene gas up to grade 5.0 purity (99.999%) in gas distribution systems.

The Gasarc Lab Master LGL510 single-stage diaphragm line regulator is designed for secondary pressure gas control of high-purity acetylene gas up to grade 5.0 purity (99.999%) in gas distribution systems.

The Gasarc Spec Master HPL620 single-stage piston line regulator is designed for secondary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) in gas distribution systems with high working pressures.

The DruvaPUR 20 m3 Series high-purity six-port dual-stage high-pressure line regulator is used in gas supply systems for pure, inert, flammable, oxidising, corrosive gases, and/or toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The DruvaPUR 20 m3 Series high-purity four-port single-stage absolute-pressure line regulator is used in gas supply systems for pure, inert, flammable, oxidising, corrosive gases, and/or toxic gases and gas mixtures up to a maximum gas purity of 6.0.