The DruvaTEC 20 m3 Two Source Single-Stage Manual Gas Manifold MTLM for industrial gas supply systems is designed for inert, flammable, and oxidising gases.

The Gasarc Tech Master GPM4220 two-stage piston manual gas manifold is designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems.

The DruvaTEC 250 m³ Series MS400 single-stage semi-automatic gas manifold is designed to reduce compressed gases from a maximum pressure of 300 bar to a continuous supply of 20 bar or 40 bar.

The Druva MM400-2 single-stage gas manifold with MR60 or MR400 regulators is designed for high-flow applications with gases up to 300 bar.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source dual-stage semiautomatic manifold - process gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source single-stage semiautomatic manifold - high-pressure valve is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source dual-stage gas manifold is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The Gasarc Chem Master SGD6040 Series two-stage differential autochange gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Lab Master LGM5040 Series two-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source single-stage gas manifold is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The Gasarc Spec Master HPD6230 Series single-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source dual-stage gas manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The Gasarc Lab Master LGM5020 Series two-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Lab Master LGD514 Series high-purity two-stage gas manifold is designed for primary pressure gas control of technical-grade acetylene gas up to 5.0 purity (99.999%) on applications where constant delivery pressure is required as the cylinder pressure decreases.

The Gasarc Spec Master HPD6240 Series two-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR MSLLEXSP is a single-source, single-stage high-purity gas manifold with low pressure and a process gas purging system in combination with a cylinder connection purging block.

The Gasarc Lab Master LGM5030 Series single-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Chem Master SGM6230 Series single-stage manual gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Spec Master HPM6030 Series single-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Spec Master HPM6020 Series two-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source dual-stage semiautomatic manifold - high-pressure valve is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The Gasarc Spec Master HPM6240 Series two-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Lab Master LGM511 Series high-purity single-stage gas manifold is designed for primary pressure gas control of technical-grade acetylene gas up to 5.0 purity (99.999%) on applications where constant delivery pressure is required as the cylinder pressure decreases.

The Gasarc Chem Master SGD6030 Series single-stage differential autochange gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

SGM6030 single-stage stainless steel diaphragm manual change gas control panel provides reliable gas supply switching and precise pressure control for high-purity gas systems.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source single-stage gas manifold - process gas purging system is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The Gasarc Spec Master HPM6040 Series two-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Chem Master SGM6010 Series single-stage manual gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Spec Master HPM6220 Series two-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Chem Master SGM6210 Series single-stage manual gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source dual-stage manual manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The Gasarc Chem Master SGD6240 Series two-stage differential autochange gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR 20 m3 Series Low Flow high-purity single-stage dual-source semiautomatic manifold - process gas purging system is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The Gasarc Spec Master HPM6210 Series single-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source single-stage gas manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity is 6.0.

The Gasarc Lab Master LGM5010 Series single-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Chem Master SGM6240 Series two-stage manual gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR MSLHHXSE is a single-source, single-stage high-purity manifold with an external gas purging system. Its internal parts are made from NI-CR-MO-ALLOY for enhanced durability.

The Gasarc Chem Master SGD6230 Series single-stage differential autochange gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source dual-stage manual manifold - high-pressure valve is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The DruvaPUR MSLLEMSE is a high-purity manual changeover gas manifold with low pressure and an external gas purging system.

The DruvaPUR MSLLEMSS is a high-purity manual changeover gas manifold with low pressure and a shut-off valve at the inlet in combination with a cylinder connection purging block.

The DruvaPUR MSLLEMSP is a high-purity manual changeover gas manifold with low pressure and a process gas purging system in combination with a cylinder connection purging block. Please note that the purging block needs to be ordered separately.

The Gasarc Lab Master LGD5040 Series two-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Lab Master LGM513 Series high-purity single-stage gas manifold is designed for primary pressure gas control of technical-grade acetylene gas up to 5.0 purity (99.999%) on applications where constant delivery pressure is required as the cylinder pressure decreases.

The Gasarc Spec Master HPD6030 Series single-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source dual-stage gas manifold - process gas purging system is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source single-stage manual manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source single-stage manual manifold - process gas purging system is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The Gasarc Chem Master SGM6220 Series two-stage manual gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source single-stage manual manifold - high-pressure valve is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source single-stage gas manifold - high-pressure valve is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The DruvaPUR 20 m3 Series Low Flow high-purity single-source dual-stage gas manifold - high-pressure valve is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases and gas mixtures. Technical Data Talk to the experts

The DruvaPUR MSLLEXSE is a single-source, single-stage high-purity gas manifold with low pressure and an external gas purging system.

The DruvaPUR 20 m3 Series high-purity dual-source dual-stage manual manifold - process gas purging system is used in gas supply systems for pure, inert, flammable, and oxidising gases and gas mixtures up to a maximum gas purity of 6.0. It is not usable for corrosive and/or toxic gases.

The Gasarc Chem Master SGS600 single-stage diaphragm cylinder regulator is designed for primary pressure gas control of corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) in applications where slight pressure variation from decreasing cylinder pressure is acceptable.

The Gasarc Spec Master HPS600 single-stage diaphragm cylinder regulator is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) in applications where slight variation from decreasing cylinder pressure is acceptable.

The DruvaPUR 20 m3 Series high-purity six-port dual-stage high-pressure cylinder regulator is used in gas supply systems for pure, inert, flammable, oxidising, corrosive gases, and/or toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The Gasarc Spec Master HPT620 two-stage piston cylinder regulator is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) in applications where constant delivery pressure is required as the cylinder pressure decreases.

The Gasarc Chem Master SGS620 single-stage piston cylinder regulator is designed for primary pressure gas control of corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) in applications where slight variation from decreasing cylinder pressure is acceptable.

The DruvaPUR 20 m3 Series high-purity six-port dual-stage cylinder pressure regulator is used in gas supply systems for pure, inert, flammable, oxidising, corrosive gases, and/or toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The DruvaPUR 20 m3 Series high-purity six-port single-stage cylinder regulator is used in gas supply systems for pure, inert, flammable, oxidising, corrosive gases, and/or toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The Gasarc Lab Master LGS500 single-stage diaphragm cylinder regulator is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) in applications where slight variation from decreasing cylinder pressure is acceptable.

The DruvaTEC 1 m³ Range single- and double-cylinder manual propane manifolds feature low-pressure regulators, safety valves, high-pressure hoses, and semi-automatic switch-over valves.

The DruvaTEC 5 m³ Range dual-source semiautomatic gas manifold is designed for applications requiring large volumes of acetylene, where uninterrupted gas flow is essential.

The DruvaTEC 1 m³ Range BMD 200-29 manual acetylene manifold comes with an inlet ball valve, upstream and downstream pressure gauges, relief valve, flashback arrestor, and connections for two cylinders.

Basic Supply System for Blender Panels. Note: This panel is not suitable for direct connection to kegs or syrup pumps unless additional secondary pressure regulators are installed downstream.

A wall-mounted CO2 panel that connects two or more cylinders to a ring main, ensuring continuous gas supply for high-volume systems like blenders, kegs, or soft drinks with a backup cylinder.

A wall-mounted Mixed Gas brewery manifold that connects multiple cylinders to a single-ring main, ensuring continuous supply for high-demand systems like blenders and kegs.

The Gasarc Tech Master GPD4230 single-stage piston differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems.

The Druva MM70-1 1 m3 series single-source single-stage acetylene manifold features a manual quick-acting shut-off device for efficient and safe gas management.

The DruvaTEC 100 m3 MTMHXSSX Dual-Source Single-Stage Semiautomatic Gas Manifold offers a flexible, safe solution for managing a range of industrial and flammable gases, with customizable options like shut-off valves and gas purging.

The DruvaTEC 100m3 MTMHXMSX single-stage manifold is suitable for industrial, inert, flammable, and oxidising gases. Not suitable for acetylene or toxic gases.

The Gasarc Tech Master GPM4010 single-stage manual gas manifold is designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems where slight pressure variation is acceptable.

The Gasarc Tech Master Mid Flow MFM4060 twin-cylinder manual gas manifold offers primary pressure control for gases up to 4.5 purity (99.995%) in gas distribution systems.

The druvaTEC 20 m³ MTLX one stage gas manifold is designed for industrial gas supply systems with a single source.

The Gasarc Tech Master GPM4040 two-stage diaphragm manual gas manifold - BS EN ISO 7291 is designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source dual-stage semiautomatic manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The Gasarc Spec Master HPM6230 Series single-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Chem Master SGM6040 Series two-stage manual gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Lab Master LGD5030 Series single-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Spec Master HPD6040 Series two-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source single-stage semiautomatic manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The DruvaPUR MSLLEXSS is a single-source, single-stage high-purity gas manifold with low pressure and a shut-off valve at the inlet in combination with a cylinder connection purging block

The Gasarc Chem Master SGM6020 Series two-stage manual change gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

Single-source ultra-high-purity manifold for first-stage pressure control of corrosive and toxic gases.

Single-source ultra-high-purity manifold with VAR stainless steel construction and free-poppet first-stage pressure regulation.

Single-source ultra-high-purity manifold with VAR stainless steel construction and tied-diaphragm first-stage pressure regulation.

Single-source ultra-high-purity manifold with tied diaphragm regulation and process gas purging.

Single-source, single-stage ultra-high purity manifold with integrated pressure regulation and purge options.

Dual-source, single-stage ultra-high-purity manifold with semi-automatic switchover, pressure regulation, and purge options.

mock-up studies are a central component of the concept phase and an important step before the detailed design of an isolator.

Efficient cleaning for safety cabinets and isolators - ergonomic, hygienic, cleanroom-compatible.

Laboratory chairs designed for comfort, durability, and ergonomic support, providing a practical seating solution for laboratories, cleanrooms, and technical work environments.

Reliable ultra-low temperature cooling for the highest demands

Safe ultra-low temperature cooling for the highest requirements

Maximum safety for your frozen samples and products

the new generation of ultra-low temperature freezers

ltra deep freezers at the highest level

ultra-low temperature freezers for maximum safety, efficiency and environmental compatibility