The DruvaPUR 20 m3 Series high-purity six-port single-stage cylinder regulator is used in gas supply systems for pure, inert, flammable, oxidising, corrosive gases, and/or toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The Gasarc Lab Master LGS500 single-stage diaphragm cylinder regulator is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) in applications where slight variation from decreasing cylinder pressure is acceptable.

The DruvaTEC 1 m³ Range single- and double-cylinder manual propane manifolds feature low-pressure regulators, safety valves, high-pressure hoses, and semi-automatic switch-over valves.

The DruvaTEC 5 m³ Range dual-source semiautomatic gas manifold is designed for applications requiring large volumes of acetylene, where uninterrupted gas flow is essential.

The DruvaTEC 1 m³ Range BMD 200-29 manual acetylene manifold comes with an inlet ball valve, upstream and downstream pressure gauges, relief valve, flashback arrestor, and connections for two cylinders.

Basic Supply System for Blender Panels. Note: This panel is not suitable for direct connection to kegs or syrup pumps unless additional secondary pressure regulators are installed downstream.

A wall-mounted CO2 panel that connects two or more cylinders to a ring main, ensuring continuous gas supply for high-volume systems like blenders, kegs, or soft drinks with a backup cylinder.

A wall-mounted Mixed Gas brewery manifold that connects multiple cylinders to a single-ring main, ensuring continuous supply for high-demand systems like blenders and kegs.

The Gasarc Tech Master GPD4230 single-stage piston differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems.

The Druva MM70-1 1 m3 series single-source single-stage acetylene manifold features a manual quick-acting shut-off device for efficient and safe gas management.

The DruvaTEC 100 m3 MTMHXSSX Dual-Source Single-Stage Semiautomatic Gas Manifold offers a flexible, safe solution for managing a range of industrial and flammable gases, with customizable options like shut-off valves and gas purging.

The DruvaTEC 100m3 MTMHXMSX single-stage manifold is suitable for industrial, inert, flammable, and oxidising gases. Not suitable for acetylene or toxic gases.

The Gasarc Tech Master GPM4010 single-stage manual gas manifold is designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems where slight pressure variation is acceptable.

The Gasarc Tech Master Mid Flow MFM4060 twin-cylinder manual gas manifold offers primary pressure control for gases up to 4.5 purity (99.995%) in gas distribution systems.

The druvaTEC 20 m³ MTLX one stage gas manifold is designed for industrial gas supply systems with a single source.

The Gasarc Tech Master GPM4040 two-stage diaphragm manual gas manifold - BS EN ISO 7291 is designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%) in gas distribution systems.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source dual-stage semiautomatic manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The Gasarc Spec Master HPM6230 Series single-stage manual change gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Chem Master SGM6040 Series two-stage manual gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The Gasarc Lab Master LGD5030 Series single-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 5.0 purity (99.999%) on gas distribution systems where slight pressure variation is acceptable.

The Gasarc Spec Master HPD6040 Series two-stage differential autochange gas manifold is designed for primary pressure gas control of non-corrosive or toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

The DruvaPUR 20 m3 Series Low Flow high-purity dual-source single-stage semiautomatic manifold - external gas purging system is used in gas supply systems for pure, inert, flammable, oxidising, corrosive, and toxic gases and gas mixtures up to a maximum gas purity of 6.0.

The DruvaPUR MSLLEXSS is a single-source, single-stage high-purity gas manifold with low pressure and a shut-off valve at the inlet in combination with a cylinder connection purging block

The Gasarc Chem Master SGM6020 Series two-stage manual change gas manifold is designed for primary pressure gas control of corrosive and toxic, high-purity gases up to grade 6.0 purity (99.9999%) on gas distribution systems where constant delivery pressure is required.

Single-source ultra-high-purity manifold for first-stage pressure control of corrosive and toxic gases.

Single-source ultra-high-purity manifold with VAR stainless steel construction and free-poppet first-stage pressure regulation.

Single-source ultra-high-purity manifold with VAR stainless steel construction and tied-diaphragm first-stage pressure regulation.

Single-source ultra-high-purity manifold with tied diaphragm regulation and process gas purging.

Single-source, single-stage ultra-high purity manifold with integrated pressure regulation and purge options.

Dual-source, single-stage ultra-high-purity manifold with semi-automatic switchover, pressure regulation, and purge options.

mock-up studies are a central component of the concept phase and an important step before the detailed design of an isolator.

Efficient cleaning for safety cabinets and isolators - ergonomic, hygienic, cleanroom-compatible.

Laboratory chairs designed for comfort, durability, and ergonomic support, providing a practical seating solution for laboratories, cleanrooms, and technical work environments.

Reliable ultra-low temperature cooling for the highest demands

Safe ultra-low temperature cooling for the highest requirements

Maximum safety for your frozen samples and products

the new generation of ultra-low temperature freezers

ltra deep freezers at the highest level

ultra-low temperature freezers for maximum safety, efficiency and environmental compatibility

Air Showers use controlled, filtered airflow to remove loose particles from personnel and equipment before entering cleanroom environments, helping maintain contamination control.

Flexible Cleanroom provides an adaptable, modular environment for contamination control, supporting pharmaceutical, laboratory, healthcare, and other controlled processes.

Weighing Cabin Cross Flow Units provide a controlled airflow workspace for weighing and handling powders, helping minimize contamination and support clean laboratory and pharmaceutical processes.

Safe transfers between hygienic areas - validated, efficient and automated

Ergonomics meets functionality

Quick and standard-compliant glove change for maximum safety and comfort in isolator operation

Efficient and standardised leak testing for isolator gloves in accordance with GMP standards

Glove Stretcher is an isolator accessory designed to facilitate efficient glove installation, adjustment, and maintenance while supporting safe and controlled isolator operation.

Customised solutions for the highest demands in the cleanroom, pharmaceutical and biotechnology sectors

Restrictive barrier system for controlled and safe processes

Compact all-round isolator for reliable product and personal protection

Small in size, big in performance. Reliable protection for all applications with toxic substances

The aseptic isolator for the highest requirements in cleanroom processes

Cytostatic isolator for safe handling of toxic substances, TÜV Nord GS-certified

Customised equipment variants and accessories

Class II safety cabinets for cytostatic applications

maximum protection for handling highly hazardous substances

safety cabinet with 100 % exhaust air for maximum freedom from contamination

safety cabinet with 100 % exhaust air for maximum freedom from contamination

Reliable personal protection for biohazardous substances

Class II biological safety cabin

The large-capacity safety cabinet for automated laboratory processes

The biological safety cabinet for small rooms and high demands

Maximum personal, product and environmental protection for microbiological applications

The compact safety cabinet for maximum microbiological safety in a small space

Certified protection for personnel, product and environment - robust, economical and powerful

The high-end safety cabinet for demanding laboratory environments

LAF Trolley is a mobile laminar airflow workstation designed to provide a controlled, clean-air environment for sample handling and laboratory processes requiring contamination control.

Compact laboratory workstation designed to provide a controlled environment for PCR preparation and molecular biology workflows, helping reduce the risk of sample contamination.

chemical indicator designed for convenient monitoring of sterilization processes, providing a clear visual response to specified sterilization conditions.

chemical indicator designed for reliable monitoring of hydrogen peroxide sterilization processes, providing a clear visual response when specified sterilization conditions are reached.

chemical indicator designed for reliable monitoring of sterilization processes, providing a clear visual response when specified sterilization conditions are reached.

For Steam Autoclaves & Ethylene Oxide Sterilisers

Spore Threads & Wires are biological indicators designed for monitoring and validating sterilization processes in challenging or specialized applications.

Excelsior Spore Suspensions are pure suspensions of viable spores from specific organisms of known resistance to various sterilization processes.

Excelsior offers a full line of spore strips for use in monitoring various sterilisation processes including Ethylene Oxide (EO), Dry Heat, Steam and Radiation.

Excelsior Scientific offers HyperGo™ stainless steel 6mm discs packaged in Tyvek® for use is VHP (Vaporised Hydrogen Peroxide) disinfection processes. These are available in Log 3, Log 4 and Log 6 populations as well as in both strains (12980 & 7953) of Geobacillus Stearothermophilus.

Excelsior offers spore ampoules for use in monitoring the efficacy of steam sterilization processes.

Mini Spore Strips will fit into small areas of a device where a standard-sized spore strip cannot be used, such as inside tubing or under a cap.

Excelsior Scientific offers SteriGo™ Self-Contained Biological Indicators (SCBIs) for Steam, Ethylene Oxide (EO) Gas, and Hydrogen Peroxide (H202) sterilisation processes. These are perfect for all types of sterilisation applications across life science, pharmaceutical and healthcare sectors.

Excelsior offers aluminium dry-block incubators for use in conjunction with these SCBIs and spore ampoules.

Growth Promotion Test Suspensions provide a quality control challenge to each batch or lot of medium, ensuring its growth promoting qualities.

Excelsior Scientific can manufacture custom strips, discs and other configurations to meet your specifications or private label production.

Excelsior Scientific offers Good to Go™ multi parameter Autoclave Time, Steam & Temperature (TST) Test Strips in Type 4 Indicator, Type 5 Integrator & Type 6 Emulator formats. These are perfect for all types of steam sterilisation applications across life science, pharmaceutical and healthcare sectors.

Excelsior Chemical Process Indicator TAPES are suitable for application of various types of sterilisation process including Steam, Hydrogen Peroxide (Plasma) & Ethylene Oxide.

hemical Indicators provide a quick visual method for monitoring sterilization processes by changing color when specific sterilization conditions are met. Ideal for routine sterilization verification in laboratories, healthcare facilities, and research environments.

Excelsior offers Bowie & Dick Test packs for monitoring steam sterilisation processes using vacuum autoclaves.

For Steam Autoclaves